* Sea-Bird SBE 9 Data File:
* FileName = C:SeasaveRawCTD_2009Minor June 2009CM_CTD_1.dat
* Software Version Seasave Win32 V 5.37d
* Temperature SN = 2723
* Conductivity SN = 2271
* Number of Bytes Per Scan = 34
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Jun 15 2009 11:25:47
* NMEA Latitude = 48 00.97 N
* NMEA Longitude = 087 45.21 W
* NMEA UTC (Time) = Jun 15 2009 16:25:07
* Store Lat/Lon Data = Append to Every Scan
** Ship:
** Cruise:
** Station:
** Latitude:
** Longitude:
# nquan = 19
# nvalues = 503
# units = specified
# name 0 = prDM: Pressure, Digiquartz [db]
# name 1 = t090C: Temperature [ITS-90, deg C]
# name 2 = c0uS/cm: Conductivity [uS/cm]
# name 3 = specc: Specific Conductance [uS/cm]
# name 4 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%]
# name 5 = wetStar: Fluorescence, Wetlab Wetstar [mg/m^3]
# name 6 = dz/dtM: Descent Rate [m/s]
# name 7 = ph: pH
# name 8 = par: PAR/Irradiance, Biospherical/Licor
# name 9 = sal00: Salinity [PSU]
# name 10 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/Kg]
# name 11 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]
# name 12 = wetCDOM: Fluorescence, Wetlab CDOM [mg/m^3]
# name 13 = latitude: Latitude [deg]
# name 14 = longitude: Longitude [deg]
# name 15 = scan: Scan Count
# name 16 = timeM: Time, Elapsed [minutes]
# name 17 = nbin: number of scans per bin
# name 18 = flag: flag
# span 0 = 1.000, 252.000
# span 1 = 3.3312, 3.5927
# span 2 = 56.955257, 58.102174
# span 3 = 100.362, 101.742
# span 4 = 95.9077, 96.9382
# span 5 = 0.5104, 2.3463
# span 6 = -0.721, 0.395
# span 7 = 7.808, 7.939
# span 8 = 4.2599e+00, 9.9990e+03
# span 9 = 0.0435, 0.0442
# span 10 = 358.975, 380.987
# span 11 = 11.48714, 12.19150
# span 12 = 0.8379, 1.4231
# span 13 = 48.01626, 48.01738
# span 14 = -87.75522, -87.75362
# span 15 = 1288, 31988
# span 16 = 0.8939, 22.2133
# span 17 = 14, 76
# span 18 = 0.0000e+00, 0.0000e+00
# interval = decibars: 1
# start_time = Jun 15 2009 11:25:47
# bad_flag = -9.990e-29
# sensor 0 = Frequency 0 temperature, 2723, 12 Feb 2009
# sensor 1 = Frequency 1 conductivity, 2271, 10 Feb 2009, cpcor = -9.5700e-08
# sensor 2 = Frequency 2 pressure, 75869, 31 Mar 2009
# sensor 3 = Extrnl Volt 0 Oxygen, SBE, primary, 0471, 06 Feb 2009
# sensor 4 = Extrnl Volt 1 WET Labs, CDOM
# sensor 5 = Extrnl Volt 2 pH, 270135, 30 Mar 2009
# sensor 6 = Extrnl Volt 3 oxidation reduction potential, 270135, 30 Mar 2009
# sensor 7 = Extrnl Volt 4 transmissometer, primary, CST-268PR, 25 Mar 2009
# sensor 8 = Extrnl Volt 5 WET Labs, WETStar fluorometer, WS3S-553P, 10 Mar 2009
# sensor 9 = Extrnl Volt 6 altimeter
# sensor 10 = Extrnl Volt 7 irradiance (PAR), primary, 4554, 18 Mar 2009
# sensor 11 = Extrnl Volt 9 surface irradiance (SPAR), degrees = 0.0
# datcnv_date = Jun 20 2009 19:48:01, 5.37e
# datcnv_in = C:SeasaveRawCTD_2009Minor June 2009CM_CTD_1.dat C:SeasaveConfiguration FilesMay2009-2.con
# datcnv_skipover = 0
# filter_date = Jun 20 2009 20:13:20, 5.37e
# filter_in = C:SeasaveConverted DataCM_CTD_1.cnv
# filter_low_pass_tc_A = 0.150
# filter_low_pass_tc_B = 0.150
# filter_low_pass_A_vars = prDM
# filter_low_pass_B_vars =
# loopedit_date = Jun 20 2009 21:02:18, 5.37e
# loopedit_in = C:SeasaveFilterCM_CTD_1f.cnv
# loopedit_minVelocity = 0.100
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = yes
# binavg_date = Jun 20 2009 21:35:37, 5.37e
# binavg_in = C:SeasaveLoop EditCM_CTD_1fl.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*