Dataset: Mumford Cove Monitoring Data
Deployment: Mumford_Cove_Subsurface_Buoy

Temp, pH, DO monitoring in Mumford Cove, CT, USA, 2015-2022

View Data: For data, See Dataset Metadata Page: https://www.bco-dmo.org/dataset/659874

Principal Investigator:

Hannes Baumann (University of Connecticut, UConn)

Contact:

Hannes Baumann (University of Connecticut, UConn)

BCO-DMO Data Manager:

Shannon Rauch (Woods Hole Oceanographic Institution, WHOI BCO-DMO)

Project:

Collaborative research: Understanding the effects of acidification and hypoxia within and across generations in a coastal marine fish (HYPOA)

Current State:

Final no updates expected

Expand/Collapse All

Description

Since April 2015, pH, DO, temperature, and salinity measurements have been taken in 30 min intervals in Mumford Cove, CT, United States. This is a shallow cove that is typical for the area.

This dataset includes records from April 14, 2015 to December 9, 2022.

A complete technical description of the pH, DO, Temp, depth, and salinity sensors can be found at http://www.waterprobes.com/#!water-quality-sensor-specifications-/c11g

Monitoring website: https://befel.marinesciences.uconn.edu/monitoring/

Methods & Sampling

Dataset acquisition description

All measurements were made with Eureka Manta Sub2 probes (www.waterprobes.com). The measurement interval was 30 minutes. All measurements were made in Mumford Cove, CT, ~ 0.5 meters above the sandy bottom. Deployment time of each sensor varied between 3-6 weeks. All probes were calibrated prior to deployment for salinity, pH, 100% air-saturated water oxygen. The probe was attached to a local subsurface buoy.

pH: calibrated with 3-point, NIST certified buffers, accuracy +/- 0.1, precision: 0.01, automatic temperature correction
Optically Measured Dissolved Oxygen (HDO): calibrated with 100% air-saturated water
Salinity: Calibrated with FisherScientific Conductivity standard 50,000 uS/cm

Data Processing Description

Dataset Processing Description

Data Processing:
QA/QC consisted of identifying and deleting salinity data that 'jumped' within a single 30 minute interval more than 1 salinity unit. pH was corrected for linear drift, using the post-calibration offset.

BCO-DMO Processing Notes:
Version 1:
(version 1 includes data from April 2015 to June 2016)
- reformatted date to yyyy-mm-dd; added date/time column in ISO8601 format;
- replaced spaces with underscores in the location name;
- filled blank cells with "nd" ("no data").

Version 2:
(version 2 includes data from April 2015 to February 2020)
- 2020-March-20: appended data from second dataset submission (monitoringMC_02).

Version 3:
(version 3 includes data from April 2015 to December 2022)
- replaced dataset with the new version, which includes all previous data and extends the sampling period to December 2022;
- converted dates to ISO 8601 format and added a column for UTC time zone;
- renamed fields to comply with BCO-DMO naming conventions.

More information about this dataset deployment

Funding

Award Number	Funding Source
OCE-1536336	NSF Division of Ocean Sciences

Instruments

Water Quality Multiprobe

Supplied Name: Eureka Manta Sub2 probe

Supplied Description:

Took data on temperature, pH, DO, and salinity

Instrument Type

Generic Name: Water Quality Multiprobe

Generic Description:

An instrument which measures multiple water quality parameters based on the sensor configuration.

Parameters

Supplied Name	Supplied description	Supplied Units	Standard Name
location	Location where measurments were taken. All measurements were made at the same location, i.e., Mumford Cove, CT, USA.	unitless	site
lat	Latitude (positive values = North)	decimal degrees	lat
lon	Longitude (negative values = West)	decimal degrees	lon
serial_number	Serial number of the corresponding probe (i.e., 3151818, 3151819, 3152273)	unitless	inst_serial_numb
ISO_DateTime_EST	Date and time of sampling in EST time zone in ISO 8601 format	unitless	ISO_DateTime_Local
temp	Water temperature	degrees Celsius	temp
pH	pH; NIST calibrated with three point NIST calibration buffers (4.00; 7.00; 10.00)	pH units	pH
cond	Specific conductivity; Calibrated with FisherScientific Conductivity standard 50,000 µS/cm	microsiemens per centimeter (µS/cm)	cond
HDO_mgl	Dissolved oxygen saturation; calibrated using 100% air-saturated water	milligrams per liter (mg/L)	O2_mg_L
HDO_percentSat	Dissolved oxygen percent saturation; calibrated using 100% air-saturated water	percent	O2_sat_pcnt
salinity	Salinity	PSS	sal
depth	Depth where measurement was taken; earlier measurements did not have a depth sensor, which was later refitted to all probes. Note that the sensor position ~0.5m above bottom did not change	meters (m)	depth
ISO_DateTime_UTC	Date and time of sampling converted to UTC time zone in ISO 8601 format	unitless	ISO_DateTime_UTC
comments	Notes about sensor deployment, post-calibration and drift corrections	unitless	comment

Database

Contribute Data

Dataset: Mumford Cove Monitoring Data
Deployment: Mumford_Cove_Subsurface_Buoy

Dataset acquisition description

Dataset Processing Description

Database

Contribute Data

Dataset: Mumford Cove Monitoring DataDeployment: Mumford_Cove_Subsurface_Buoy

Dataset acquisition description

Dataset Processing Description

Dataset: Mumford Cove Monitoring Data
Deployment: Mumford_Cove_Subsurface_Buoy