Notes on Volume Filtered values:

The 1 m2 MOCNESS net volume filtered data were corrected for the following net tows:

The flowmeter used to calculate the volume of water filtered did not work for the tows shown below; the data shown in the listings for those tows are therefore derived, not measured. Using the net distance and the average angle of the net, the volume filtered was estimated. These estimates have about a 10% error or higher when currents were present.

2001: No further corrections. MOC-1 net volume filtered values were used to calculate abundance/m3 for all net tows. No Optical Plankton Counter (OPC) volume filtered values were available for 2001.

2002: The flowmeter data was not accurate for some net tows in 2002. Optical Plankton Counter (OPC) volume filtered was used to calculate abundance/m3 for all MOC-1 net tows, except casts 11 and 16 which used the MOC-1 volume filtered values. The decision to use OPC values was determined by plotting all OPC volume filtered numbers versus MOC-1 flow meter data (see below). MOC-1 flow meter data were consistently lower and had a lower R2 regression for volume filtered versus length of tow (time). Meng Zhou and Yiwi Zhu, who conducted the MOC-1 net tows, noted on the haul sheets that there were problems with the MOC-1 flow meters and that they often were not responsive or worked intermittently. Thus, it was decided that the OPC flow meter data provided a more consistent measure of net flow volume for 2002 net tows. The OPC mouth opening for flow meter data was corrected to the MOC-1 net mouth opening by multiplying the OPC flow data by 200. The two casts that used MOC-1 flow meter data were cases where the OPC flow meter data appeared to underestimate the flow.

Fig. 3. Volume filtered over time for both MOCNESS and Optical Plankton Counter showing consistently lower flow rates for the MOCNESS.

DMO Note:

Revised data received Jan. 2008. Reformatted for this data system from Excel spreadsheets, joined with event log metadata (date, lat, lon, depth_w) using 8200 server and restructured using rs 2.0 before serving here. Each individual euphausiid is listed with its length. The abundance for each length bin is given beside the last specimen for that bin. The abundance for the stage and species are shown beside the last specimen of each stage and species, respectively.

Further Data Mgmt. Office Notes [2008-07-07, N. Copley]:

Kendra Daly's updated data for krill, 'K' [https://www.bco-dmo.org/dataset/2366] and zooabund_lmg, 'Z' [https://www.bco-dmo.org/dataset/2386]:

date range of DMO work: 20080318 - 20080801:

2001 data:

K: changed station 1 to 1A to agree with Z and eventlog.
station 1A - changed time_local_begin from 500 to 456 to agree with event log.
Abundance:
2001, sta. 1A, tow1 - no data for this tow was in the previously served data so DMO added it.
2001, sta. 1B, tow3, net4 - abundances were not calculated in the spreadsheet. DMO made the calculations in the file 2001_St1C3_LF.xls page net_7_LF and added them to the data file.
K:
tow 13 and 14 were on 18th; MOC-15 was on 19th, all at station 2.
tow 13 and 14 original datafile lists station as 4 but were changed to station 2 to agree with event log and map (See station map and MOC location map, above).
tow 15 date changed from 18 to 19 to agree with Z and eventlog.
sta. 6, tow 17:
- day_local for K changed from 25 to 27th to agree with revised datafile, Zooabund object, and event log.
- net 8 (surface tow) has counts for Z (no abundance because vol_filt is nd) but not for K:
There are plenty of krill in both files - krill data added from the kdaly file '2001_St7C17_LF.xls'

2002 data:

Notes pertaining to both 2001 and 2002:

sta. 6, tow 17 net 8 (surface net): has counts but no abundance because vol_filt is nd.
Added a column in Zooabund called taxon_group which also exists in zooabund_nbp. It has 3 categories: Copepoda, Euphausiacea, and Other_Zooplankton. This somewhat solves Jason's request (email, 3mar04) to be able to look at just the copepods or another group. If one wants to look at something like molluscs, they'll have to subset the data to include all the mollusc taxa (squid, other_gastropods, thecate_pteropods, etc.).
Z: changed Unidentified_Copepodite to Unidentified_or_Other in order to accomodate species that were identified but on the standard list that are not necessarily copepodites.
K: Only 5 tows have actual length; the rest have ranges.
split ranges up into two columns (replace hyphen with tab):
changed the length ranges that use commas in place of decimal points to decimals.
DMO added min and max columns for both the bins and the actual lengths since most of the tows don't have lengths, but rather have length ranges which are a smaller range with the length_bin
DMO added depth_open and depth_close to krill_length object
Plot off the cast locations created with matlab script.

updated January 6, 2006, gfh
updated July 30, 2008, njc

krill.csv