Silica dissolution estimates from sediment traps from R/V Tangaroa cruise 61TG_3052 in the Southern Ocean in 1999 (SOIREE project)

Website: https://www.bco-dmo.org/dataset/2853
Version: 25August2009
Version Date: 2009-08-25

Project
» Southern Ocean Iron Release Experiment (SOIREE)

Program
» Iron Synthesis (FeSynth)
ContributorsAffiliationRole
Nodder, ScottNew Zealand National Institute of Water and Atmospheric Research (NIWA)Principal Investigator
Waite, AnyaCentre for Water Research, University of Western Australia (CWR)Co-Principal Investigator
Mackie, DougUniversity of OtagoContact
Gegg, Stephen R.Woods Hole Oceanographic Institution (WHOI)BCO-DMO Data Manager


Dataset Description

SOIREE Sediment Traps - Silica Dissolution Estimates


Methods & Sampling

See SOIREE Preliminary Voyage Report

METHOD:

Biogenic silica content was determined on mass flux samples after digestion in
0.2 M NaOH, following the methods of Ragueneau and Tréguer (1994).

Estimated accuracy of replicate analyses: ±5-10%



Refer to Nodder & Waite in DSRII


Data Processing Description

See SOIREE Preliminary Voyage Report

BCO-DMO Processing Notes

Generated from original file SOIREE_Export_final.xls, Tab: TrapsPSiFlux

provided on the Deep-Sea Research II 48 (2001) accompanying CD-Rom

BCO-DMO Edits

- parameter names modified to conform to BCO-DMO convention

- Blank rows in original sheet removed

- 'nd' added to blank cells

- Made column header record one line

- Formatted Date to YYYYMMDD

- Dates, Times, Lat, Lons added from file: SOIREE_SedimentTraps_TrapDeploy.xls




[ table of contents | back to top ]

Data Files

File
traps_SiDisEst.csv
(Comma Separated Values (.csv), 1.11 KB)
MD5:7ae9e8e68db8706fb0dc30f2d66523d4
Primary data file for dataset ID 2853

[ table of contents | back to top ]

Parameters

ParameterDescriptionUnits
date

date - No indication of local, NZST or UTC

YYYYMMDD
Patch

Patch Location (In/Out)

text
Patch_Trap

Patch Location of Trap (In/Out)

text
SOIREEDay

SOIREE Experiment Day

T1 = 0000 h NZST 10/02/99 + 24 hours

text
Water_column_DRSi

Water column DRSi

uM
Trap_DRSi

Trap DRSi

uM
Difference

Difference

uM
Mass_DRSi

Mass DRSi

mg
Average

Average

uM
Trap

Trap Id

text
depth

Nominal depths only, actual depths were 10 m deeper

meters
Date_Start_NZST

Start date of trap deployment (NZST)

YYYYMMDD
Time_Start_NZST

Start time of trap deployment (NZST)

HHMM
lat_Start

Start latitude of trap deployment

negative denotes South

decimal degrees
lon_Start

Start longitude of trap deployment

negative denotes West

decimal degrees
lat_End

End latitude of trap deployment

negative denotes South

decimal degrees
lon_End

End longitude of trap deployment

negative denotes West

decimal degrees
Date_End_NZST

End date of trap deployment (NZST)

YYYYMMDD
Time_End_NZST

End time of trap deployment (NZST)

HHMM


[ table of contents | back to top ]

Instruments

Dataset-specific Instrument Name
Sediment Trap
Generic Instrument Name
Sediment Trap
Dataset-specific Description
MULTI-trap dimensions: Length (L, m): 0.58 Trap length with baffles inserted; L without baffles: 0.525 m AR without baffles: 7.50 Trap volume without baffles: 2.021 litres Inside diameter (Di, m): 0.07 Outside diameter (Do, m): 0.08 Aspect ratio (AR): 8.29 Aspect ratio with salt (AR): 7.29 Basal brine added to a height of 1-trap diameter (7 cm) Collection area (A, m2): 0.00385 Trap volume (V, m3): 0.00223 Trap volume (V, litres): 2.232 Baffle length (Lb, m): 0.08 Baffle diameter (Dib, m): 0.01 Baffle aspect ratio (ARb): 5.77
Generic Instrument Description
Sediment traps are specially designed containers deployed in the water column for periods of time to collect particles from the water column falling toward the sea floor. In general a sediment trap has a jar at the bottom to collect the sample and a broad funnel-shaped opening at the top with baffles to keep out very large objects and help prevent the funnel from clogging. This designation is used when the specific type of sediment trap was not specified by the contributing investigator.


[ table of contents | back to top ]

Deployments

61TG_3052

Website
Platform
R/V Tangaroa
Report
Start Date
1999-01-31
End Date
1999-03-01
Description
Cruise to the Southern Ocean as part of the Fe Sythesis project whose aim was to maintain a coherent patch of iron-enriched seawater for the duration of SOIREE and to interpret any iron-mediated effects on the patch by conducting measurements and performing experiments during this period.


[ table of contents | back to top ]

Project Information

Southern Ocean Iron Release Experiment (SOIREE)

Coverage: Southern Ocean


Project in the Southern Ocean aimed at maintaining a coherent patch of iron-enriched seawater for the duration of project and to interpret any iron-mediated effects on the patch by conducting measurements and performing experiments during this period of the project.

The Southern Ocean Iron RElease Experiment (SOIREE), was the first in situ iron fertilization experiment performed in the polar waters of the Southern Ocean. SOIREE was an interdisciplinary study involving participants from six countries, and took place in February 1999 south of the Polar Front in the Australasian-Pacific sector of the Southern Ocean.

Approximately 3800 kg of acidified FeSO4.7H2O and 165 g of the tracer sulphur hexafluoride (SF6) were added to a 65-m deep surface mixed layer over an area of ~50 km2. Initially, mean dissolved iron concentrations were ~2.7 nM, but decreased to ambient levels within days, requiring subsequent additions of 1550-1750 kg of acidified FeSO4.7H2O on days 3, 5 and 7 of the experiment.

During the 13-day site occupation, there were iron-mediated increases in phytoplankton growth rates, with marked increases in chlorophyll a (up to 2 µgl-1) and production rates (up to 1.3 gCm-2d-1). These resulted in subsequent changes in the pelagic ecosystem structure, and in the cycling of carbon, silica and sulphur, such as a 10% drawdown of surface CO2.

The SOIREE bloom persisted for >40 days following our departure from the site, as observed via SeaWiFS remotely sensed observations of Ocean Colour.

BCO-DMO Note:
All original data and metadata provided on a CD-Rom accompanying the Deep-Sea Research II 48 (2001) volume. The CD-Rom contains the main SOIREE datasets and ancillary information including the pre-experiment 'desktop' database study for site-selection, and satellite images of the SOIREE bloom.
© 2001 Elsevier Science Ltd. All rights reserved.

Related files

SOIREE Preliminary Voyage Report
SOIREE Introduction and Summary, Deep-Sea Research II 48 (2001) 2425-2438
SOIREE Cruise Track



[ table of contents | back to top ]

Program Information

Iron Synthesis (FeSynth)

Coverage: Global


The two main objectives of the Iron Synthesis program (SCOR Working Group proposal, 2005), are:
1. Data compilation: assembling a common open-access database of the in situ iron experiments, beginning with the first period (1993-2002; Ironex-1, Ironex-2, SOIREE, EisenEx, SEEDS-1; SOFeX, SERIES) where primary articles have already been published, to be followed by the 2004 experiments where primary articles are now in progress (EIFEX, SEEDS-2; SAGE, FeeP); similarly for the natural fertilizations S.O.JGOFS (1992), CROZEX (2004/2005) and KEOPS (2005).

2. Modeling and data synthesis of specific aspects of two or more such experiments for various topics such as physical mixing, phytoplankton productivity, overall ecosystem functioning, iron chemistry, CO2 budgeting, nutrient uptake ratios, DMS(P) processes, and combinations of these variables and processes.

SCOR Working Group proposal, 2005. "The Legacy of in situ Iron Enrichments: Data Compilation and Modeling".
http://www.scor-int.org/Working_Groups/wg131.htm

See also: SCOR Proceedings Vol. 42 Concepcion, Chile October 2006, pgs: 13-16 2.3.3 Working Group on The Legacy of in situ Iron Enrichments: Data Compilation and Modeling.

The first objective of the Iron Synthesis program involves a data recovery effort aimed at assembling a common, open-access database of data and metadata from a series of in-situ ocean iron fertilization experiments conducted between 1993 and 2005. Initially, funding for this effort is being provided by the Scientific Committee on Oceanic Research (SCOR) and the U.S. National Science Foundation (NSF).

Through the combined efforts of the principal investigators of the individual projects and the staff of Biological and Chemical Oceanography Data Management Office (BCO-DMO), data currently available primarily through individuals, disparate reports and data agencies, and in multiple formats, are being collected and prepared for addition to the BCO-DMO database from which they will be freely available to the community.

As data are contributed to the BCO-DMO office, they are organized into four overlapping categories:
1. Level 1, basic metadata
(e.g., description of project/study, general location, PI(s), participants);
2. Level 2, detailed metadata and basic shipboard data and routine ship's operations
(e.g., CTDs, underway measurements, sampling event logs);
3. Level 3, detailed metadata and data from specialized observations
(e.g., discrete observations, experimental results, rate measurements) and
4. Level 4, remaining datasets
(e.g., highest level of detailed data available from each study).

Collaboration with BCO-DMO staff began in March of 2008 and initial efforts have been directed toward basic project descriptions, levels 1 and 2 metadata and basic data, with detailed and more detailed data files being incorporated as they become available and are processed.

Related file

Program Documentation

The Iron Synthesis Program is funded jointly by the Scientific Committee on Oceanic Research (SCOR) and the U.S. National Science Foundation (NSF).



[ table of contents | back to top ]