SBE9+ s/n 785 Pressure calibration 08 Aug 2008
Channel 1:
SBE4c s/n 04 3089 Conductivity calibration 16 Mar 2010
SBE3T s/n 03P 4502 Temperature calibration 24 Mar 2010
SBE43 s/n 43 1642 Dissolved Oxygen calibration 12 June 2009

Channel 2:
SBE4c s/n 04 3042 Conductivity calibration 24 Mar 2010
SBE3T s/n 03P 4507 Temperature calibration 12 Mar 2010

Transmissometer WetLabs Model CSTar s/n CST - 1117DR Calibrated 30 April 2008

Fluorometer WetLabs Model FLNTU s/n FLNTURD-304 Calibrated 10 March 2008

Surface PAR Biospherical Instruments QSR-240 s/n 6294 Calibrated 13 March 2008

Aquatic PAR Biospherical Instruments s/n QSP-200L4 s/n 4550 Calibrated 13 March 2008

Channel 2 is used for most profiles as there were problems with the pump for channel 1
on some stations. Oxygen is taken from channel 1, however there are some bad values
which are not yet flagged.

Sample header file:
* Sea-Bird SBE 9 Data File:
* FileName = C:Datactd19708001.hdr
* Software Version Seasave V 7.18d
* Temperature SN = 4502
* Conductivity SN = 3089
* Number of Bytes Per Scan = 40
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = May 23 2010 08:09:54
* NMEA Latitude = 11 33.61 N
* NMEA Longitude = 056 47.89 W
* NMEA UTC (Time) = May 23 2010 08:09:51
* Store Lat/Lon Data = Append to Every Scan
** Ship: R/V Knorr
** Station: 001
** Operator: Victoria
** station 001 cast 01 event 01.03
# nquan = 23
# nvalues = 1994
# units = specified
# name 0 = prDM: Pressure, Digiquartz [db]
# name 1 = depSM: Depth [salt water, m]
# name 2 = t190C: Temperature, 2 [ITS-90, deg C]
# name 3 = c1S/m: Conductivity, 2 [S/m]
# name 4 = sbeox0V: Oxygen Voltage, SBE 43
# name 5 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%]
# name 6 = bat: Beam Attenuation, Chelsea/Seatech/Wetlab CStar [1/m]
# name 7 = flECO-AFL: Fluorescence, Wetlab ECO-AFL/FL [mg/m^3]
# name 8 = upoly0: Upoly 0, FLNTU turbidity
# name 9 = spar: SPAR/Surface Irradiance
# name 10 = par: PAR/Irradiance, Biospherical/Licor
# name 11 = cpar: CPAR/Corrected Irradiance [%]
# name 12 = t090C: Temperature [ITS-90, deg C]
# name 13 = c0S/m: Conductivity [S/m]
# name 14 = depSM: Depth [salt water, m], lat = 11.5602
# name 15 = density11: Density, 2 [density, Kg/m^3]
# name 16 = sigma-t11: Density, 2 [sigma-t, Kg/m^3 ]
# name 17 = potemp190C: Potential Temperature, 2 [ITS-90, deg C]
# name 18 = sal11: Salinity, Practical, 2 [PSU]
# name 19 = svWM: Sound Velocity [Wilson, m/s]
# name 20 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/Kg], WS = 2
# name 21 = sbeox0PS: Oxygen, SBE 43 [% saturation], WS = 2
# name 22 = flag: flag
# span 0 = 5.029, 2019.162
# span 1 = 4.978, 1997.855
# span 2 = 3.4786, 28.9724
# span 3 = 3.293110, 5.786188
# span 4 = 1.2362, 2.4303
# span 5 = 93.5592, 97.7670
# span 6 = 0.0903, 0.2663
# span 7 = -0.0113, 0.4303
# span 8 = 1.0607965, 1.3869948
# span 9 = 1.5656e+01, 1.7824e+01
# span 10 = 1.0000e-12, 1.0000e-12
# span 11 = 5.6114e-12, 6.3893e-12
# span 12 = 3.4787, 28.9723
# span 13 = 3.293104, 5.786650
# span 14 = 5.000, 1998.000
# span 15 = 1020.0771, 1037.0397
# span 16 = 20.0517, 27.8118
# span 17 = 3.3170, 28.9661
# span 18 = 32.1813, 37.0067
# span 19 = 1486.29, 1544.67
# span 20 = 112.419, 249.669
# span 21 = 38.99671, 96.04706
# span 22 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = May 23 2010 08:09:51
# bad_flag = -9.990e-29
# datcnv_date = Jun 23 2010 19:27:22, 7.20c
# datcnv_in = Z:Data aw19708001.hex Z:Data aw19708001.CON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = yes
# filter_date = Jun 23 2010 19:27:59, 7.20c
# filter_in = Z:Datavicprocess19708001.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 0.150
# filter_low_pass_A_vars = depSM t190C c1S/m sbeox0V xmiss bat flECO-AFL upoly0 spar cpar t090C c0S/m
# filter_low_pass_B_vars = prDM
# alignctd_date = Jun 23 2010 19:28:04, 7.20c
# alignctd_in = Z:Datavicprocess19708001.cnv
# alignctd_adv = c1S/m 0.073, sbeox0V 2.000
# celltm_date = Jun 23 2010 19:28:09, 7.20c
# celltm_in = Z:Datavicprocess19708001.cnv
# celltm_alpha = 0.0000, 0.0300
# celltm_tau = 0.0000, 7.0000
# celltm_temp_sensor_use_for_cond = , secondary
# loopedit_date = Jun 23 2010 19:28:14, 7.20c
# loopedit_in = Z:Datavicprocess19708001.cnv
# loopedit_minVelocity = 0.250
# loopedit_surfaceSoak: minDepth = 5.0, maxDepth = 20, useDeckPress = 1
# loopedit_excl_bad_scans = yes
# wildedit_date = Jun 23 2010 19:28:19, 7.20c
# wildedit_in = Z:Datavicprocess19708001.cnv
# wildedit_pass1_nstd = 2.0
# wildedit_pass2_nstd = 20.0
# wildedit_pass2_mindelta = 0.000e+000
# wildedit_npoint = 100
# wildedit_vars = prDM depSM t190C c1S/m xmiss bat flECO-AFL upoly0 spar par cpar t090C c0S/m
# wildedit_excl_bad_scans = yes
# wfilter_date = Jun 23 2010 19:28:23, 7.20c
# wfilter_in = Z:Datavicprocess19708001.cnv
# wfilter_excl_bad_scans = yes
# wfilter_action xmiss = gaussian, 200, 100, 0
# wfilter_action bat = gaussian, 200, 100, 0
# wfilter_action flECO-AFL = gaussian, 200, 100, 0
# Derive_date = Jun 23 2010 19:28:31, 7.20c
# Derive_in = Z:Datavicprocess19708001.cnv Z:Data aw19708001.con
# derive_time_window_docdt = seconds: 2
# derive_ox_tau_correction = yes
# binavg_date = Jun 23 2010 19:28:45, 7.20c
# binavg_in = Z:Datavicprocess19708001.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = no
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*

CTD_Bottle.csv