* Sea-Bird SBE 9 Data File:
* FileName = C:\CTD\RR1202\RR1202-112B06.hex
* Software Version Seasave V 7.21d
* Temperature SN = 4941
* Conductivity SN = 1879
* Number of Bytes Per Scan = 40
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Mar 18 2012 03:34:01
* NMEA Latitude = 40 15.78 S
* NMEA Longitude = 109 37.63 E
* NMEA UTC (Time) = Mar 18 2012 03:33:51
* Store Lat/Lon Data = Append to Every Scan
** RR1202 RR1202
** Great Belt 2 Great Belt 2
** Latitude 40o 15.782' S
** Longitude 109o 37.635' E
** Event # 20120770333
* System UTC = Mar 18 2012 03:34:01
# nquan = 15
# nvalues = 592
# units = specified
# name 0 = scan: Scan Count
# name 1 = prDM: Pressure, Digiquartz [db]
# name 2 = depSM: Depth [salt water, m]
# name 3 = t090C: Temperature [ITS-90, deg C]
# name 4 = c0S/m: Conductivity [S/m]
# name 5 = t190C: Temperature, 2 [ITS-90, deg C]
# name 6 = c1S/m: Conductivity, 2 [S/m]
# name 7 = sbeox0V: Oxygen raw, SBE 43 [V]
# name 8 = bat: Beam Attenuation, Chelsea/Seatech [1/m]
# name 9 = flSP: Fluorescence, Seapoint
# name 10 = par: PAR/Irradiance, Biospherical/Licor
# name 11 = sal00: Salinity, Practical [PSU]
# name 12 = sal11: Salinity, Practical, 2 [PSU]
# name 13 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
# name 14 = flag: flag
# span 0 =       2969,      16625
# span 1 =      5.543,    303.555
# span 2 =      5.500,    301.000
# span 3 =    10.2339,    15.8715
# span 4 =   3.822456,   4.362125
# span 5 =    10.2365,    15.8727
# span 6 =   3.822430,   4.362125
# span 7 =     2.3546,     2.6443
# span 8 =     0.5215,     0.7819
# span 9 = 3.2715e-02, 1.0978e+00
# span 10 = 7.3978e-01, 8.1863e+02
# span 11 =    34.7811,    34.9216
# span 12 =    34.7781,    34.9189
# span 13 =    5.77219,    6.05822
# span 14 = 0.0000e+00, 0.0000e+00
# interval = meters: 0.5
# start_time = Mar 18 2012 03:33:51 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="15" >
#   <sensor Channel="1" >
#     
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4941</SerialNumber>
#       <CalibrationDate>22-Nov-2011 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>4.35132730e-003</A>
#       <B>6.42190077e-004</B>
#       <C>2.13259987e-005</C>
#       <D>1.67064322e-006</D>
#       <F0_Old>1000.000</F0_Old>
#       <G>4.35113101e-003</G>
#       <H>6.41979575e-004</H>
#       <I>2.12937606e-005</I>
#       <J>1.66918567e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>1879</SerialNumber>
#       <CalibrationDate>29-Nov-11</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-4.15590326e+000</G>
#         <H>5.39097077e-001</H>
#         <I>-7.71437706e-004</I>
#         <J>6.72579504e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0401</SerialNumber>
#       <CalibrationDate>02-Dec-11</CalibrationDate>
#       <C1>-4.588163e+004</C1>
#       <C2>1.989810e-001</C2>
#       <C3>1.408190e-002</C3>
#       <D1>3.950300e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>2.998526e+001</T1>
#       <T2>-2.557400e-004</T2>
#       <T3>4.268350e-006</T3>
#       <T4>1.671990e-009</T4>
#       <Slope>0.99997494</Slope>
#       <Offset>1.74668</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.117000e-002</AD590M>
#       <AD590B>-8.668320e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4943</SerialNumber>
#       <CalibrationDate>22-Nov-2011 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>4.37964247e-003</A>
#       <B>6.41168176e-004</B>
#       <C>2.24890121e-005</C>
#       <D>2.09823639e-006</D>
#       <F0_Old>1000.000</F0_Old>
#       <G>4.37943702e-003</G>
#       <H>6.40956250e-004</H>
#       <I>2.24569681e-005</I>
#       <J>2.09677218e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>1919</SerialNumber>
#       <CalibrationDate>29-Nov-11</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-3.99251720e+000</G>
#         <H>5.25640038e-001</H>
#         <I>-9.93453447e-004</I>
#         <J>7.87689910e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     
#     <FluoroSeapointSensor SensorID="11" >
#       <SerialNumber>SCF 3003</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       
#       <GainSetting>2</GainSetting>
#       <Offset>0.000</Offset>
#     </FluoroSeapointSensor>
#   </sensor>
#   <sensor Channel="7" >
#     
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>4643</SerialNumber>
#       <CalibrationDate>14 Dec 2009</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>1324503311.26000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.01510000</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="8" >
#     
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>CST-1189DR</SerialNumber>
#       <CalibrationDate>2008 Nov 3</CalibrationDate>
#       <M>19.3070</M>
#       <B>-1.1970</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="9" >
#     
#   </sensor>
#   <sensor Channel="10" >
#     
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>41832</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.020</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     
#   </sensor>
#   <sensor Channel="12" >
#     
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>1129</SerialNumber>
#       <CalibrationDate>23-Nov-11</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         
#         <Soc>5.0382e-001</Soc>
#         <offset>-0.5242</offset>
#         <A>-3.1601e-003</A>
#         <B> 1.0886e-004</B>
#         <C>-2.1050e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 2.2400</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="13" >
#     
#   </sensor>
#   <sensor Channel="14" >
#     
#   </sensor>
#   <sensor Channel="15" >
#     
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber>QSR-2200 202227</SerialNumber>
#       <CalibrationDate>2 Feb 2006</CalibrationDate>
#       <ConversionFactor>1781.54000000</ConversionFactor>
#       <RatioMultiplier>1.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Mar 20 2012 23:04:30, 7.21d [datcnv_vars = 11]
# datcnv_in = C:\CTD\rr1202\rr1202-112b06.hex C:\CTD\rr1202\rr1202-112b06.CON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = yes
# wildedit_date = Mar 20 2012 23:08:20, 7.21d
# wildedit_in = C:\CTD\Processing\process\rr1202-112b06.cnv
# wildedit_pass1_nstd = 2.0
# wildedit_pass2_nstd = 20.0
# wildedit_pass2_mindelta = 1.000e-002
# wildedit_npoint = 100
# wildedit_vars = prDM depSM t090C c0S/m t190C c1S/m sbeox0V bat flSP par
# wildedit_excl_bad_scans = yes
# wfilter_date = Mar 20 2012 23:11:57, 7.21d
# wfilter_in = C:\CTD\Processing\process\rr1202-112b06.cnv
# wfilter_excl_bad_scans = yes
# wfilter_action t090C = median, 21
# wfilter_action c0S/m = median, 21
# wfilter_action t190C = median, 21
# wfilter_action c1S/m = median, 21
# wfilter_action sbeox0V = gaussian, 21, 0.3, 0
# wfilter_date = Mar 20 2012 23:15:16, 7.21d
# wfilter_in = C:\CTD\Processing\process\rr1202-112b06.cnv
# wfilter_excl_bad_scans = yes
# wfilter_action sbeox0V = gaussian, 21, 0.3, 0
# alignctd_date = Mar 20 2012 23:51:11, 7.21d
# alignctd_in = C:\CTD\Processing\process\rr1202-112b06.cnv
# alignctd_adv = sbeox0V 3.500
# celltm_date = Mar 20 2012 23:54:28, 7.21d
# celltm_in = C:\CTD\Processing\process\rr1202-112b06.cnv
# celltm_alpha = 0.0200, 0.0000
# celltm_tau = 7.0000, 0.0000
# celltm_temp_sensor_use_for_cond = primary,
# celltm_date = Mar 20 2012 23:57:34, 7.21d
# celltm_in = C:\CTD\Processing\process\rr1202-112b06.cnv
# celltm_alpha = 0.0000, 0.0200
# celltm_tau = 0.0000, 6.0000
# celltm_temp_sensor_use_for_cond = , secondary
# Derive_date = Mar 21 2012 00:01:34, 7.21d [derive_vars = 3]
# Derive_in = C:\CTD\Processing\process\rr1202-112b06.cnv C:\CTD\Processing\process\rr1202-112b06.CON
# derive_time_window_docdt = seconds: 2
# derive_ox_tau_correction = yes
# loopedit_date = Mar 21 2012 00:07:01, 7.21d
# loopedit_in = C:\CTD\Processing\process\rr1202-112b06.cnv
# loopedit_minVelocity = 0.300
# loopedit_surfaceSoak: minDepth = 5.0, maxDepth = 20, useDeckPress = 1
# loopedit_excl_bad_scans = yes
# binavg_date = Mar 21 2012 00:10:32, 7.21d
# binavg_in = C:\CTD\Processing\process\rr1202-112b06.cnv
# binavg_bintype = meters
# binavg_binsize = 0.5
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# split_date = Mar 21 2012 00:11:03, 7.21d
# split_in = C:\CTD\Processing\process\rr1202-112b06.cnv
# split_excl_bad_scans = no
# file_type = ascii
*END*