The data were corrected for decay from the time of sampling. 223Ra was corrected for 227Ac (ex223Ra), 224Ra was corrected for 228Th (ex224Ra). The radium activity of the water samples (cartridges) were corrected from the measured radium on acrylic fiber (<1L/min) using the emanation technique.

Information on data quality and intercalibration can be found in the intercalibration report (PDF).

Quality flag definitions:
1 = 228Radium measured in Modane (France),
2 = Radium efficiency based on Silicate/radium correlation,
3 = Below detection,
4 = vial broken, sample lost,
5 = efficiency can not be determined,
6 = 228Radium measured through 228Thorium (gamma spectroscopy),
7 = 228Radium measured through 228Actinium (gamma spectroscopy),
8 = Pump Failure, no sample collected,
9 = Interpolated value based on neighboring data points,
10 = based on the Barium / Radium relationship
11 = Questionable quality.

BCO-DMO Processing:
- converted date format to YYYYmmdd;
- modified parameter names to conform with BCO-DMO and GEOTRACES naming conventions.

Additional GEOTRACES Processing by BCO-DMO:
As was done for the GEOTRACES-NAT data, BCO-DMO added standard US GEOTRACES information, such as the US GEOTRACES event number, to each submitted dataset lacking this information. To accomplish this, BCO-DMO compiled a 'master' dataset composed of the following parameters:
cruise_id, EXPOCODE,SECT_ID, STNNBR, CASTNO, GEOTRC_EVENTNO, GEOTRC_SAMPNO, GEOTRC_INSTR, SAMPNO, GF_NO, BTLNBR, BTLNBR_FLAG_W, DATE_START_EVENT, TIME_START_EVENT, ISO_DATETIME_UTC_START_EVENT, EVENT_LAT, EVENT_LON, DEPTH_MIN, DEPTH_MAX, BTL_DATE, BTL_TIME, BTL_ISO_DATETIME_UTC, BTL_LAT, BTL_LON, ODF_CTDPRS, SMDEPTH, FMDEPTH, BTMDEPTH, CTDPRS, CTDDEPTH.

This added information will facilitate subsequent analysis and inter-comparison of the datasets.

Bottle parameters in the master file were taken from the GT-C_Bottle and ODF_Bottle datasets. Non-bottle parameters, including those from GeoFish tows, Aerosol sampling, and McLane Pumps, were taken from the TN303 Event Log (version 30 Oct 2014). Where applicable, pump information was taken from the PUMP_Nuts_Sals dataset.

A standardized BCO-DMO method (called "join") was then used to merge the missing parameters to each US GEOTRACES dataset, most often by matching on sample_GEOTRC or on some unique combination of other parameters.

If the master parameters were included in the original data file and the values did not differ from the master file, the original data columns were retained and the names of the parameters were changed from the PI-submitted names to the standardized master names. If there were differences between the PI-supplied parameter values and those in the master file, both columns were retained. If the original data submission included all of the master parameters, no additional columns were added, but parameter names were modified to match the naming conventions of the master file.

See the dataset parameters documentation for a description of which parameters were supplied by the PI and which were added via the join method.

Radium_joined.csv