Methodology:
This work analyzed V isotope composition of previously collected sediments from a global network that have a range of bottom water oxygen conditions. Below is a description of the methods used for the samples collected by various cruises.

Twenty-two pelagic sediment samples from various localities around the globe were investigated in this study. A total of thirteen samples were analyzed from the Pacific Ocean at water depths of 3500–5800 m, four samples were analyzed from the Indian Ocean at water depths of 4400–5200 m, four samples were analyzed from the Atlantic Ocean at water depths of 3300–6000 m, and one sample was analyzed from the Arctic Ocean at water depths of 4041 m. All the samples are distal from any known marine hydrothermal vent field and thus should not include a hydrothermal signature. Sediment lithologies consist predominantly of oxidized fine-grained pelagic clay ranging from light to dark brown or greenish-gray in color, with various carbonate and calcareous ooze contents. Dried sediments were collected from cores housed in the sediment repository of Woods Hole Oceanographic Institution (WHOI) and from the U.S. GEOTRACES East Pacific Zonal Transect (EPZT GP16). These samples are bulk powders from the top portions (0–10 cm) of cores.

Sediment samples from the continental margin off Namibia in the eastern South Atlantic were collected as part of the RV Meteor expeditions M57/2. The core samples were collected on a continental slope transect with water depths between 605 and 2470 m. The bottom water oxygen contents of the sample locations are from 150 to 220 µM. The sediments in the Eastern Cape Basin are characterized by low input of terrigenous matter and high biogenic contents. The high amounts of organic matter (up to 9% for the analyzed V isotope sites) in the sediments are due to high water column primary production on the shelf and lateral transport of organic carbon from the shelf to the slope. The sediments off Namibia analyzed here are all core top sediments from 0 to 5 cm.

Sediment samples from the Argentine Basin in the western South Atlantic were collected during R/V Meteor expedition M78/3. The predominantly terrigenous material in this region is delivered from the numerous fluvial tributaries along the coast of Argentina and Uruguay and transported further downslope via gravity-controlled mass flows. The core samples were collected east of the Rio de la Plata mouth from water depths between 58 m and 4273 m, forming a transect from shelf to deep basin. The sediments from the Argentine Basin analysis here are from core depths between 5 to 45 cm.

Samples from the Peruvian Margin in this study were mostly from a transect along 11°S during the RV Meteor cruise M77-1 in November 2008. In addition, some Peruvian Margin sediment samples were collected during the U.S. GEOTRACES East Pacific Zonal Transect (EPZT GP16) and R/V Moana Wave cruise 87 leg 08. High oxygen demand within the water column leads to a perennial oxygen minimum zone (OMZ) that impinges on the continental shelf/ slope between 50 and 500 m water depth. Thirteen sediment cores were analyzed from the continental shelf to deep slope at water depths between 85 and 2025 m, which transects from the reducing OMZ to the deeper oxic seafloor with bottom water oxygen contents from 1.5 mM to 93.4 µM. The Peruvian Margin samples analyzed were from core depths between 0 to 35 cm.

Sediment samples from the deepest portion (594 m water depth) of the Santa Barbara Basin were collected in 2001 as part of the CALMEX cruise (R/V New Horizon in November 2001). The Santa Barbara Basin is a shallow, near-shore basin off southern California with a sill depth of approximately 475 m. Below the basin sill depth of 475 m, the water column is characterized by limited exchange with waters outside of the basin, thus the circulation within the basin is restricted resulting in low bottom water oxygen concentrations, typically < 5 µM, though the concentration can vary on seasonal timescales The core samples were collected at the center of the basin with bottom water oxygen contents near-zero (1 µM). The Santa Barbara Basin samples analyzed here include the core top sediment (0–3 cm) to shallow depths (10–11 cm).

Sediment samples from the Cariaco Basin were collected in 1990 as part of the PLUME Leg 7 Cruise (R/V Thomas Washington). The Cariaco Basin is the second-largest euxinic (anoxic and sulfidic water column) marine basin in the modern ocean. Below 300 m water depth, the basin is euxinic due to a combination of limited deepwater renewal and high surface productivity supplying organic matter that promotes microbial respiration, oxygen depletion, and the accumulation of hydrogen sulfide. Seven separate box core top samples (0–1 cm) from around the Cariaco basin including both sub-basins were collected. All of the Cariaco sediment samples measured in this study were collected below the permanent chemocline (sulfidic portion) at water depths between 400 and 1350 m.

Sampling and analytical procedures:
Sample dissolution:
Samples were dissolved using bulk digestion and leaching methods. Both methods were carried out to ensure that the V isotope analyses captured the authigenic values, especially given the limited enrichment for some of the samples (e.g. differences between the bulk and leach methods). For the bulk digestion, sediment samples for V isotope analysis were ashed overnight at 600°C to remove organic phases. Ashed sediment powders were then completely digested with a multi-acid HF–HNO₃–HCl procedure using trace metal clean acids. All materials were completely dissolved in 0.8 N HNO₃ prior to purification using ion exchange column chemistry.

The leach technique was applied to extract authigenic V. For the organic carbon-rich sediments, splits of sediment were leached in a Teflon Savillex vial with 3 mL of 3 N HNO₃ for 12–16 hours at room temperature with constant agitation using a shaking table. These samples were then centrifuged, and the supernatant was collected and placed in a new clean Savillex vial and dried. During the collection of the supernatant, care was taken to avoid the solid phase siliciclastic materials; additionally, HF was avoided to ensure the limited dissolution of siliciclastic minerals. Several high-purity acid treatments (aqua regia, conc. HNO₃) were added to each vial to completely oxidize any organic matter that might have been present. Samples were then dissolved with 0.8 N HNO₃ prior to ion exchange column chemistry. To validate this leaching method, the leaching method was performed on United States Geological Survey (USGS) shale standards SCo-1 and SDO-1 with 1 N HNO₃ concentrations. Splits of the leach solution were also taken for elemental analysis.

For the oxic pelagic sediments, we applied the well-established extraction technique for oxide dissolution to obtain the isotopic analysis of the authigenic V. One aliquot of the pelagic sediments was reacted in 10 mL 25% acetic acid + 1 N hydroxylamine hydrochloride solution at 90°C for three hours, and each sample was agitated every 30 minutes. The supernatant was removed from the detrital particles, treated with 8 N HNO₃ and then dissolved with 0.8 N HNO₃ prior to ion exchange column chemistry.

Vanadium Purification:
The purification of V was conducted with a four-step ion exchange procedure by coupling cation-and anion-exchange columns. Briefly, samples were first loaded on a cation resin AG50W-X12 (200–400 mesh) and major cations Al, Ti, and Na were eluted with 0.8 N HNO₃ + 0.1 N HF and 0.8 N HNO₃. V was then eluted and collected with 1.2 N HNO₃. The major cations Fe, Mg and Ca do not leave the resin by the time all of the V is eluted, thus the procedure separates all major cations except for K. The anion exchange resin AG1-X8 (200–400 mesh) was subsequently applied to remove all the residual matrix elements from V as described in Nielsen et al. (2011). The anion column was performed twice in order to quantitatively remove any residual Ti and Cr. In-between each column, samples were evaporated and refluxed in aqua regia overnight at 135°C to remove potential organic material leached from the resin, evaporated again, and redissolved in the next solution. The yield of the entire V column chemistry procedure is within error of 100%. Samples were re-dissolved in 1 mL 2% HNO₃ prior to elemental and isotopic analysis. Total procedural blanks (from sample dissolution/leach to instrumental analysis) were < 2 ng, which is negligible compared with the amount of V extracted from each sample (2-6 mg).

Instrumental Configuration:
Instrument measurements were performed at the National High Magnetic Field Laboratory at Florida State University (FSU) using a Thermo Scientific Neptune Multicollector-Inductively Coupled Plasma-Mass Spectrometer (MC-ICP-MS). Measurements were performed on the flat-topped shoulder on the lower mass side of the overlapping V and molecular interference peaks in medium-resolution mode (resolution > 4000) to resolve all interfering molecular species representing combinations of C, N, O, S, Ar and Cl (such as ³⁶Ar¹⁴N+, ³⁶Ar¹⁶O+, and ³⁸Ar¹⁴N+). To obtain the highest possible V transmission efficiency, solutions were introduced with a desolvating nebulizer system (Aridus II) and Jet sample and Ni X-skimmer cones were also applied. The typical sensitivity of ⁵¹V under such configuration was 1.5–2.5 nA/ppm.

Sed_V_signatures.csv