The reported errors for radionuclide concentrations represent the propagation of one sigma errors based on the standard isotope ratios collected by ICP-MS, estimated error in the 229Th or 233Pa spike concentration, and the blank correction of the individual isotopes. As noted above, samples were corrected for blanks using the procedural blank analyzed during the same sample batch.

Samples were analyzed 2 to 3 years after collection. A correction was made to account for the ingrowth of 230Th and 231Pa due to the decay of the natural 234U and 235U preserved in the acidified samples during the period of time between sample collection and U-Th/Pa separation during anion exchange chromatography. Thus, the reported 230Th and 231Pa concentrations have been corrected to represent their concentrations at the time of sampling. U concentrations were estimated using the bottle salinity (S) measured from the CTD and the U-Salinity relationship in seawater (Owens et al., 2011), [U] = (0.100 * S – 0.326) ng U (g seawater)-1. We used seawater U-isotopic compositions of 234U/238U = 1.1468 activity ratio (Andersen et al., 2010), and 238U/235U = 137.824 mole ratio (Weyer et al., 2008), to calculate [234U] and [235U] respectively based on [U].

Individual uncertainties for protactinium and thorium were calculated to include contributions from blank correction, standard error of the ratios of the analysis (typically close to counting statistics) and spike calibration. For protactinium we also included assessment of the correction from the yield correction, mass bias and instrument background. In order to assess the reproducibility of the procedure, repeat analyses were performed on the GEOTRACES SW STD 2010-1 artificial seawater standard (Anderson et al., 2012). For standards run alongside these seawater samples, the reproducibility for each isotope was 2.8% for 232Th, 2.0% for 230Th, and 9.9% for 231Pa.

Quality Flags:
SeaDataNet quality flags have been assigned to all measured and derived parameters. More information on SeaDataNet quality flags is available from GEOTRACES at https://www.geotraces.org/geotraces-quality-flag-policy/and from SeaDataNet at https://www.seadatanet.org/Standards/Data-Quality-Control. In summary:

0 = no quality control;
1 = good value;
2 = probably good value;
3 = probably bad value;
4 = bad value;
5 = changed value;
6 = value below detection;
7 = value in excess;
8 = interpolated value;
9 = missing value;
A = value phenomenon uncertain.

Concentrations below the limit of detection (LOD) are indicated as "nd" and flagged with "6". The missing data identifier, "nd", also refers to no data available when flagged with "9" (i.e., no analysis).

930347_v1_gi02_dissolved_th_and_pa_isotopes.csv