Dataset: Heatwave Experiment: Temperature HOBO Logger

Name: Temperature data measured during a heatwave experiment done September to November 2018 using reef building corals collected in Kāne'ohe Bay, O'ahu, Hawai'i
Published: 2023-01-31
Keywords: oceans

Cite This Dataset

DOI:10.26008/1912/bco-dmo.884738.1

Spatial Extent: N:21.477194 E:-157.786861 S:21.429417 W:-157.833667

Temporal Extent: 2018-09-22 - 2018-11-17

Project:

NSFOCE-BSF: COLLABORATIVE RESEARCH: Elucidating adaptive potential through coral holobiont functional integration (Holobiont Integration)

Co-Principal Investigator:

Hollie Putnam (University of Rhode Island, URI)

Student:

Emma Strand (University of Rhode Island, URI)

BCO-DMO Data Manager:

Karen Soenen (Woods Hole Oceanographic Institution, WHOI BCO-DMO)

Version:

Version Date:

2023-01-31

Restricted:

Validated:

Yes

Current State:

Final no updates expected

Temperature data measured during a heatwave experiment done September to November 2018 using reef building corals collected in Kāne'ohe Bay, O'ahu, Hawai'i

Abstract:

Two common reef-building corals, Montipora capitata and Pocillopora acuta, were collected from six sites in Kāne'ohe Bay, O'ahu, Hawai'i. Fragments were allowed to acclimate in experimental tanks for two weeks prior to exposure to one of the following four treatments: Ambient Temperature Ambient pCO2 (ATAC), Ambient Temperature High pCO2 (ATHC), High Temperature Ambient pCO2 (HTAC), and High Temperature High pCO2 (HTHC). The treatment period lasted for a two month period, starting on September 22nd, 2018 and lasting through November 17th, 2018. Following the stress period, coral fragments were exposed to a two-month recovery period in ambient conditions. HOBO loggers were placed in each tank and recorded temperature every ten minutes.

Expand/Collapse All

Archival Copy

Version Date	Archive	Persistent Identifier	Date Assigned
2023-01-31	Marine Biological Laboratory/Woods Hole Oceanographic Institution Library (MBLWHOI DLA)	10.26008/1912/bco-dmo.884738.1	2023-01-31

Methods & Sampling

Corals sampled at six reefs within Kāne'ohe Bay, O'ahu, Hawai'i:

1.) USA: Hawaii HIMB: 21.436056, -157.786861
2.) USA: Hawaii Reef.11.13: 21.450806, -157.794944
3.) USA: Hawaii Reef.35.36: 21.473889, -157.833667
4.) USA: Hawaii Reef.18: 21.450806, -157.811139
5.) USA: Hawaii Lilipuna.Fringe: 21.429417, -157.791111
6.) USA: Hawaii Reef.42.43: 21.477194, -157.826889

Experiment conducted at the Hawai'i Institute of Marine Biology.

Experimental Tank Setup: Treatment conditions (n=3 tanks treatment-1) were randomly assigned to twelve outdoor mesocosm tanks (122 cm x 122 cm x 30 cm; 510 L). Flow rates, measured daily with a graduated cylinder and timer, averaged 84.36 ± 1.20 mL second-1 (n=826), providing full mesocosm tank turnover every ~2 hours. Mesocosm tanks were 60% shaded from full irradiance, and photosynthetically active radiation was measured continuously with the Apex cosine corrected PAR Sensor (accuracy = ± 5%) that was cross calibrated to the Li-Cor cosine corrected PAR sensor (LI-193). Additionally, light values (PAR) from six different positions in each tank were compared to determine spatial differences within each tank. There was no significant difference in light between positions in each tank (n=4 position-1 tank-1). Based on these results, light was measured in the center of the tank ~daily for the duration of the experiment using the Li-Cor 193 spherical underwater quantum sensor. To further reduce any potential position effects with respect to incoming water, heater position, or bubble stream, the positions of the coral fragments in the tank were changed weekly.

Experimental temperature conditions: Temperature treatment conditions were programmed to mimic the natural daily fluctuations (0.75 °C ± 0.06) of the environment at the collection sites in Kāneʻohe Bay, Hawaiʻi (NOAA Moku o Loʻe Buoy data from September 2018). Based on these data, high temperature treatment fluctuated between ~29-30°C to reflect previous marine heatwaves in Kāneʻohe Bay, Hawaiʻi (+2°C above ambient temperature). Temperature was monitored with Apex Extended Life Temperature Probes (accuracy = ± 0.05 °C, Neptune Systems) and temperature loggers (HOBO Water Temp Pro v2, accuracy = ±0.21°C, resolution = 0.02°C, Onset Computer Corp) that were placed in each tank at the same height as the coral fragments for the duration of the experiment and logged temperature at 10 minute intervals. Temperature was separately controlled by submersible heaters (ProHeat D-1500 Heater Controllers, precision ± 1°C) due to the electrical demand of the heaters. Ambient temperature treatments were not controlled, and thus reflected the natural conditions of Kāneʻohe Bay.

Data Files

File
hobo_logger.csv (Comma Separated Values (.csv), 22.03 KB) MD5:0b12f3087d325290796465261a215aef Primary data file for dataset ID 884738

More Information about this dataset

Funding Sources

Funding Source	Award Number
NSF Division of Ocean Sciences	OCE-1756623

Deployments

None available yet

Instruments

Onset HOBO Pro v2 temperature logger

Supplied Name: HOBO Water Temp Pro v2 Onset Computer Corp

Supplied Description:

Instrument Type

Generic Name: Onset HOBO Pro v2 temperature logger

Acronym: HOBO U22-001

Community Identifier: http://vocab.nerc.ac.uk/collection/L05/current/134/

Generic Description:

The HOBO Water Temp Pro v2 temperature logger, manufactured by Onset Computer Corporation, has 12-bit resolution and a precision sensor for ±0.2°C accuracy over a wide temperature range. It is designed for extended deployment in fresh or salt water.

Operation range: -40° to 70°C (-40° to 158°F) in air; maximum sustained temperature of 50°C (122°F) in water
Accuracy: 0.2°C over 0° to 50°C (0.36°F over 32° to 122°F)
Resolution: 0.02°C at 25°C (0.04°F at 77°F)
Response time: (90%) 5 minutes in water; 12 minutes in air moving 2 m/sec (typical)
Stability (drift): 0.1°C (0.18°F) per year
Real-time clock: ± 1 minute per month 0° to 50°C (32° to 122°F)

Additional information (http://www.onsetcomp.com/)
Onset Computer Corporation
470 MacArthur Blvd
Bourne, MA 02532

Parameters

Date and time formats are described in python strftime() syntax.

Supplied Name	Supplied description	Supplied Units	Standard Name
Treatment	Tank treatment condition	units	treatment
Date	Date of measurement summary Format: %Y-%m-%d	units	date
N	Sample size for that date (Every 10 minutes in each tank; 3 tanks per treatment)	units	nbin
Temperature	date of measurement summary	degrees Celsius (°C)	temperature
sd	Standard deviation	degrees Celsius (°C)	std_dev
se	Standard error	degrees Celsius (°C)	std_err
ci	Confidence Interval	degrees Celsius (°C)	confidence_interval

Status message

Database

Contribute Data

Dataset: Heatwave Experiment: Temperature HOBO Logger