Dataset: Mussel lab incubations: periostracum and pH (effect on shell dissolution)

Overview: Trials examining rates of shell dissolution were conducted in seawater of differing carbonate system conditions, using dead shells of sacrificed adult California mussel individuals. A first set of experiments determined the relationship between percent surface cover of periostracum and shell dissolution rate under contemporary but chemically stressful seawater conditions. For the current study, adult mussels (42 - 64 mm in length) were collected from Marshall Gulch, California (38.369738 °N, -123.073921 °W) between August 2021 and March 2022 and transported immediately to the University of California Davis’ Bodega Marine Laboratory (< 30 min distance), in Bodega Bay, California. Mussels were held in filtered, flow-through seawater and fed ad libitum until used in experiments.

Shell preparation and periostracum cover measurements: The extent of intact periostracum coverage was determined for one of two valves of each M. californianus mussel. We photographed individual valves with a 12.2-megapixel digital camera (Google Pixel 4a) and then quantified the area of valve covered by periostracum and total valve surface area using ImageJ (software version 1.52a) calibrated to a scale bar. Because we were interested in the effects of the periostracum in protecting the exterior surface of the shell, we sealed the inner, nacre layer of the shell with silicone (Loctite marine silicone sealant) to prevent its contact with seawater.

Seawater manipulation: We used two techniques to establish the different pH treatments employed in our experiments. In the dissolution incubations conducted at pH = 7.5 (n = 49), we modified seawater chemistry using a standard mass-flow control system, bubbling gas of a fixed partial pressure of CO₂ directly into filtered seawater via flow-through sumps. In dissolution trials involving pH = 7.7 (n = 9) and 7.4 (n = 16), we employed an alternative, but equivalent, approach to manipulating seawater pH where we used direct chemical modification to the seawater carbonate system via equimolar additions of 1 M sodium bicarbonate (NaHCO₃) and 1 M hydrochloric acid (HCl). Both methods of seawater manipulation result in an increase of dissolved inorganic carbon (DIC) and reduction of seawater pH without changing total alkalinity (TA).

Dissolution Incubations and Analysis: Following determination of percent cover of periostracum, we incubated each mussel valve in a sealed 250 mL Nalgene bottle filled with modified seawater for 48 hours in a temperature-controlled room, recording seawater properties in each bottle before and at the end of each incubation, including temperature, salinity, and pH (Yellow Springs Instruments Professional Plus Sonde). YSI sonde pH values were calibrated to the total scale based on pH spectrophotometric measurements of m-cresol dye absorbance at the incubation temperature. Incubation bottles were agitated gently once every 8 hours over the course of the incubations to reduce the establishment of strong chemical gradients of their fluid contents. We took discrete seawater samples at the onset and end of each incubation for determination of total alkalinity concentration (TA); these “before-after” measurements of TA enabled quantification of the increase in alkalinity within each bottle over the duration of the incubation, and thereby the rate of dissolution of calcium carbonate (CaCO₃) shell material for individual valves of known periostracum cover. Shell dissolution rates were quantified using standard alkalinity anomaly techniques (analyzing seawater samples in triplicate and selecting median TA for dissolution quantification), which relate calcium carbonate shell loss to an increase in the total alkalinity (TA) of surrounding seawater, per unit time. Across the dissolution trials, control incubations (15% of daily sample size) of modified seawater were conducted to verify minimal background changes in TA.