Dataset: Tubeworms
Deployment: AT37-13

View Data: For data, See Dataset Metadata Page: https://www.bco-dmo.org/dataset/806468

Principal Investigator:

Erik E. Cordes (Temple University, Temple)

Co-Principal Investigator:

Lisa A. Levin (University of California-San Diego Scripps, UCSD-SIO)

Victoria J. Orphan (California Institute of Technology, Caltech)

Christopher Neil Roman (University of California-San Diego Scripps, UCSD-SIO)

Gregory Rouse (University of California-San Diego Scripps, UCSD-SIO)

Contact:

Erik E. Cordes (Temple University, Temple)

BCO-DMO Data Manager:

Karen Soenen (Woods Hole Oceanographic Institution, WHOI BCO-DMO)

Project:

Collaborative research: Quantifying the biological, chemical, and physical linkages between chemosynthetic communities and the surrounding deep sea (Costa Rica Seeps)

Version:

Expand/Collapse All

Description

Sampling information from tubeworms and associated organisms collected from different seep sites off the Costa Rica margin. The collections were made aboard R/V Atlantis during 2017 and 2018 using DSV Alvin. In 2019 the collections were made aboard R/V Falkor, using the ROV Subastian. Sampling information contains diameter, length, Phylum, Class, Order, Family and Genus.

Methods & Sampling

Dataset acquisition description

Samples were collected using deep sea vehicle Alvin and ROV Subastian, on R/V Atlantis and R/V Falkor. Methods used for collection involved either grabs, mussel pots, bushmaster junior, suction apparatus or net scoops.

Bushmaster – Original instruments created at Penn State to collect hydrothermal vent and methane seep communities. Hydraulic rods are attached to a very fine mesh that is deployed over the tubeworm patch of interest to collect the tubeworms and associated community. Once the assemblage is enclosed, the net is cinched closed using the submersible or ROV manipulator. Like the mussel pot, this allows for quantitative collections of tubeworm communities.

Data Processing Description

Dataset Processing Description

Samples were processed aboard R/V Atlantis and R/V Falkor and sent back to Temple University, PA, USA for processing.

BCO-DMO processing notes:

Adjusted certain lat and lon values to decimal degrees, with negative values for south and west.
Added ISO_DateTime_UTC column
Reformated date to YYYY-MM-DD
Reformated time to HH:MM
Adjusted column names to comply with database requirements

More information about this dataset deployment

Funding

Award Number	Funding Source
OCE-1635219	NSF Division of Ocean Sciences

Instruments

Bottom Sediment Grab Samplers

Supplied Name: Grab

Supplied Description:

Instrument Type

Generic Name: Bottom Sediment Grab Samplers

Acronym: BSGS

Community Identifier: http://vocab.nerc.ac.uk/collection/L05/current/50/

Generic Description:

These samplers are designed to collect an accurate representative sample of the sediment bottom. The bite of the sampler should be deep enough so all depths are sampled equally. The closing mechanism is required to completely close and hold the sample as well as prevent wash-out during retrieval. Likewise, during descent the sampler should be designed to minimize disturbance of the topmost sediment by the pressure wave as it is lowered to the bottom.

Bushmaster

Supplied Name: Bushmaster (BM)

Supplied Description:

Original instruments created at Penn State to collect hydrothermal vent and methane seep communities. Hydraulic rods are attached to a very fine mesh that is deployed over the tubeworm patch of interest to collect the tubeworms and associated community. Once the assemblage is enclosed, the net is cinched closed using the submersible or ROV manipulator. Like the mussel pot, this allows for quantitative collections of tubeworm communities.

Instrument Type

Generic Name: Bushmaster

Generic Description:

Bushmaster samplers are original instruments created at Penn State to collect hydrothermal vent and methane seep communities. Hydraulic rods are attached to a very fine mesh that is deployed over the tubeworm patch of interest to collect the tubeworms and associated community. Once the assemblage is enclosed, the net is cinched closed using the submersible or ROV manipulator. This allows for quantitative collections of tubeworm communities.

Parameters

Supplied Name	Supplied description	Supplied Units	Standard Name
Cruise_number	Cruise code #	unitless	cruise_id
Dive	Submersible dive #	unitless	dive_id
Location	Dive location	unitless	station
Latitude	Latitude of sample - south is negative	decimal degrees	lat
Longitude	Longitude of sample - west is negative	decimal degrees	lon
Depth	Depth sample collected at	meter (m)	depth
Date	Date sample collected on - format YYYY-MM-DD (in UTC)	unitless	date_utc
Time	Time sample collected at - format HH:SS (in UTC)	unitless	time_utc
Collected_in	Instrument/box collected in	unitless	sample_descrip
Tentative_ID	ID given on board the ship	unitless	sample
Diameter	Organism diameter at tube opening	millimeter (mm)	diameter
Length	Organism length to 2 mm	millimeter (mm)	length
Phylum	Phylum	unitless	phylum
Class	Class	unitless	class
Order	Order	unitless	order
Family	Family	unitless	family
Genus	Genus	unitless	genus
Species	Species	unitless	species
ISO_DateTime_UTC	ISO format of Date and Time in UTC (YYYY-MM-DDTHH:MMZ)	yyyy-MM-dd'T'HH:mm'Z'	ISO_DateTime_UTC
Notes	The 4mm note means that the tubeworm was measured down to 4mm instead of 2mm, probably because the root had broken away.	unitless	comment

Database

Contribute Data

Dataset: Tubeworms
Deployment: AT37-13

Dataset acquisition description

Dataset Processing Description

Database

Contribute Data

Dataset: TubewormsDeployment: AT37-13

Dataset acquisition description

Dataset Processing Description

Dataset: Tubeworms
Deployment: AT37-13